Safety Light Curtain for Power Presses for Human Safety
Right Angle Clamp for Safety Light Curtain
Right Angle Clamp for Safety Light Curtain

Body Protection Area Sensor

Model : LC Series / LX Series

Electronic switches offers safety light curtain for Human Body Protection with  Parallel and Cross Beams  offering various models and covering different covered heights. Pitch offered is 90 mm. which senses any part of the body in danger zone. Product is offered with Powder coated Aluminum housing with connecting cables.

Features

  • NPN or PNP output
  • Multiple ranges available as required
  • LED indication for output status
  • Non Critical alignment between the Sensors
  • Available in Aluminum Housing
  • Available in multiple covered heights

Product Variants

Protected Height Models  /  Beams Models  /  Beams Pitch mm Overall Height
270 LC 0490  /   4 LX 0490  /   10 90 405
630 LC 0890  /   8 LX 0890  /   22 90 765
990 LC 1290  /  12 LX 1290  /   34 90 1125
1350 LC 1690  /  16 LX 1690  /   46 90 1485
1710 LC 2090  /  20 LX 2090  /   58 90 1845
2070 LC 2490  /  24 LX 2490  /   70 90 2205
2430 LC 2890  /  28 LX 2890  /   82 90 2555

Specifications

Series / Type LC Series   /  LX Series  /  One Output or Two Outputs in Parallel
Power Supply 12 – 24 Volts DC / Reverse Polarity Protected
Output PNP or NPN
Output Indications Through LEDs
channel Indication LED indication for each channel
Response Time On to Off : 10 – 15 m sec. Off to On : 50 – 100 m sec
No of basic beams 4, 8, 12, 16, 20, 24, 28
Beam By Pass Provided in hand/body protection models
Protected Heights 405 – 2555 mm
Pitch offered 90 mm
Adjustable Range 500 mm  –  3000 mm  ( Higher ranges available )
Standard Cable length  5 meters for emitter, 3 meters for receiver
Operating Temperature Up to 55 Degrees centigrade
Cross Section 36 x 42 mm
Electrical Connections  Plug in Connector for Emitter & Receiver
Applicable to  Directly work with PLCs / Controllers
Protections Output short circuit protected.
Vibration Resistance Amplitude : 0.75 mm (p) Freq : 10 – 55 Hzs, Rate : 1 Octave / min
Operating ambient Light 500 Lux ( max.) when source is places opposite to receiver,  > 3000 lux when source placed at an angle of 20 degrees
Suitable for Machines / Systems with quick emergency stop

Applications

  • For Body Protection from Dangerous machines or systems
  • Suitable for Big Pneumatic or Hydraulic Power Presses
  • As Safety Barriers for various machines / perimeter control
  • Used in Injection Molding Machines for Sliding Door
  • Also used in Tyre molding, forging presses, conveyor belts / Area safety
  • Also used for Protection from Robots, Very High Voltage systems

Downloads

Specifications

Additional information

Downloads